Belt Length Calculator (2024)

Last updated:Mar 03, 2024

Table of contents

Two pulley system - belt lengthHow to compute like our belt length calculator?Another belt length formula?FAQs

Welcome to the belt length calculator! If you need to determine the length of any belt - be it a timing, ribbed, flat, or v-belt - you are in the right place. In the following text, we will introduce you to the belt length formula and show you how to use it.

Check out this pulley calculator to find out more about pulley RPM, speed, and belt tension.

Two pulley system - belt length

Pulleys can trace their origins to before 200 B.C. Originally, they were used to lift buckets of water from wells, rivers, etc. Nowadays they are everywhere - in clocks mechanisms, on construction sites, and in elevators. And that's just the tip of the iceberg. System like this are used to transmit torque (or power) across axles, providing mechanical advance.

Let's learn how to calculate the length of a belt in a two-pulley system with differing diameters of pulleys. You can do it by inputting the distance between the axles of the pulleys and their diameters into the following formula:

$\footnotesize\begin{split} &\text{Belt length} = \\&\quad \left((D_\mathrm{L} + D_\mathrm{S}) \cdot \frac{π}{2}\right) \\&\quad +(D_\mathrm{L} - D_\mathrm{S}) \cdot \arcsin\!\left(\frac{D_\mathrm{L} - D_\mathrm{S}} {2L}\right) \\ &\quad+ 2 \sqrt{(L^2− 0.25 \cdot (D_\mathrm{L} - D_\mathrm{S})^2)}\end{split}$ Beltlength=((DL+DS)⋅2π)+(DL−DS)⋅arcsin(2LDL−DS)+2(L2−0.25⋅(DL−DS)2)

, where:

$\small D_\mathrm{L}$ DL is the diameter of the large pulley;
$\small D_\mathrm{S}$ DS is the diameter of the smaller pulley; and
$\small L$ L is the distance between the pulley axles.

With our belt length calculator, you can also calculate the distance between the centers of two pulleys for a given belt length.

How to compute like our belt length calculator?

Let's say that you own a factory and you need to calculate a v-belt length. The diameters of the pulleys are 15 and 30 cm, and you want the distance between them to be 1.5 meters.

$\small D_\mathrm{L} = 30\space \mathrm{cm} = 0.3\space \mathrm{m}$ DL=30cm=0.3m
$\small D_\mathrm{S} = 15\space \mathrm{cm} = 0.15\space \mathrm{m}$ DS=15cm=0.15m
$\small L = 1.5 \space \mathrm{m}$ L=1.5m

Input the values into the equation. Note, that the units are not relevant as long as they're the same for all variables.

$\footnotesize\begin{split} &\text{Belt length} = \\&\quad \left((0.3 + 0.15) \cdot \frac{π}{2}\right) \\&\quad +(0.3 - 0.15) \cdot \arcsin\!\left(\frac{0.3 - 0.15} {2\cdot 1.5}\right) \\ &\quad+ 2 \sqrt{(1.5^2− 0.25 \cdot (0.3 - 0.15)^2)} \\&\quad= \bold{3.71}\space \bold m\end{split}$ Beltlength=((0.3+0.15)⋅2π)+(0.3−0.15)⋅arcsin(2⋅1.50.3−0.15)+2(1.52−0.25⋅(0.3−0.15)2)=3.71m

Simple, right? But, did you know that there is an even easier solution to your belt length problem? And it doesn't have trigonometric functions or square roots!

Another belt length formula?

There is a different belt length formula common among engineers. It's an approximation of the one given above:

$\footnotesize\begin{split}&\text{Belt length} = \\ &\frac{π}{2}(D_\mathrm{L} + D_\mathrm{S}) + 2L +\frac{(D_\mathrm{L} - D_\mathrm{S})^2}{4L} \\\end{split}$ Beltlength=2π(DL+DS)+2L+4L(DL−DS)2

, where:

$\small D_\mathrm{L}$ DL is the diameter of the large pulley;
$\small D_\mathrm{S}$ DS is the diameter of the smaller pulley; and
$\small L$ L is the distance between the pulley axles.

You can find the belt length calculated with this equation by clicking on the Engineering approximation heading of our calculator.

It works well for two pulleys of a similar size or ones that are further apart. The estimation fails when one pulley is much larger than the other and they are close together. However, such cases are uncommon in engineering, as they can lack the adequate drive. As engineers didn't always have a belt length calculator at hand, they used a simplified equation to calculate faster.

Interested in mechanics? The mechanical advantage calculator will ease you into the world of simple machines!

FAQs

How to calculate a conveyor belt lenght?

To calculate a conveyor belt length:

Check the diameters of the two pulleys you have.
Measure the distance between the pulley axles.
Use our belt length calculator to find the belt length in seconds.

Does belt length affect speed?

While the length of a belt doesn't affect speed, its thickness does. That's why it's important to choose the right type of belt for the pulleys you're using.

What types of belts are there?

Belts can have different shapes and can be made from different materials. The type of belt you choose depends on the application. You can get the following:

Flat belt;
V belt;
Circular belt;
Timing belt;
Spring belt;
Ribbed belt;
Film belt; and
More.

What belt length do I need for two pulleys 56 inches apart?

Assuming that the pulleys have diameters of 6 and 20 inches, you need a belt that's exactly 153.72 inches. To find that number on your own, you need to use the belt length formula:

Belt length = π/2 × (D_L + D_S) + 2L + (D_L - D_S)²/(4L)

, where:

D_L is the diameter of the larger pulley (here 20 inches);
D_S is the diameter of the smaller pulley (here 6 inches); and
L is the distance between the center of the pulleys.

Belt Length Calculator (2024)

Two pulley system - belt length

How to compute like our belt length calculator?

Another belt length formula?

How to calculate a conveyor belt lenght?

Does belt length affect speed?

What types of belts are there?

What belt length do I need for two pulleys 56 inches apart?

References